update code

README.openfwwf

@@ -0,0 +1,46 @@
+Open FirmWare for WiFi networks: a UniBS NTW group project
+
+Realized by Francesco Gringoli and Lorenzo Nava
+
+Welcome!
+
+   OpenFWWF, Open FirmWare for WiFi networks, is a project that wants to
+   provide an easy and inexpensive platform to implement new Medium Access
+   Control (MAC) mechanism, and wants to be a valid alternative to
+   simulations and expensive ad-hoc platforms. The combination of OpenFWWF
+   and b43 driver is a complete and cheap tool that makes testing of new
+   MAC easy achievable.
+
+   This site provides an open source firmware for Broadcom/AirForce
+   chipset based devices. Currently this firmware has been tested on 4306
+   and 4318 chipset revisions and with kernel 2.6.27-rc5 (module b43 from
+   wireless-testing). Firmware has been developed starting from
+   specifications in http://bcm-v4.sipsolutions.net: we report here
+   some information more we discovered, such as important interactions
+   between the MAC processor, the hardware registers and the operating
+   mechanisms that rules data frames along the transmission and reception
+   paths.
+   This project has been successfully completed thanks to the work of
+   reverse engineering available at http://bcm-v4.sipsolutions.net and
+   to the tools that Michael Buesch makes available to the community.
+
+   What this firmware supports:
+     * works in infrastructured mode as both station and AP, the latter
+       requires hostapd
+     * it is compliant with DCF access scheme in b and g modes, not tested
+       in a bands
+     * Preliminary testing shows that ad-hoc mode works as it does with
+       proprietary firmware
+
+   What this firmware does not support:
+     * does not implement RTS/CTS handshake procedure, must be disabled on
+       module load
+     * does not work with hardware cryptography acceleration, use without
+       encryption!
+     * does not work with dot11 QoS, must be disabled on module load
+
+
+If you need help:
+
+   If you need help, send a message to the OpenFWWF team:
+   mailto:openfwwf@ing.unibs.it

b43-openfwwf.spec

@@ -0,0 +1,47 @@
+Name:		b43-openfwwf
+Version:	5.2
+Release:	21
+Summary:	Open Source firmware for Broadcom/AirForce chipset based devices
+License:	GPLv2
+URL:		http://www.ing.unibs.it/openfwwf/
+Source0:	http://www.ing.unibs.it/openfwwf/firmware/openfwwf-%{version}.tar.gz
+Source1:	README.openfwwf
+Source2:	openfwwf.conf
+BuildArch:	noarch
+
+BuildRequires:	b43-tools gcc-c++
+Requires:	udev module-init-tools
+
+%description
+Open Source firmware for Broadcom/AirForce chipset based devices.
+Known supported boards until now: 4306, 4311(rev1), 4318 and 4320.
+
+%package_help
+
+%prep
+%autosetup -n  openfwwf-%{version}
+sed -i s/"-o 0 -g 0"// Makefile
+install -p -m 0644 %{SOURCE1} .
+install -p -m 0644 %{SOURCE2} .
+
+%build
+%make_build
+
+%install
+make install PREFIX=$RPM_BUILD_ROOT/lib/firmware/b43-open
+install -d  $RPM_BUILD_ROOT%{_prefix}/lib/modprobe.d
+install -p  openfwwf.conf $RPM_BUILD_ROOT%{_prefix}/lib/modprobe.d/openfwwf.conf
+
+%files
+%license COPYING LICENSE
+/lib/firmware/b43-open/*.fw
+%attr(0644,root,root) %{_prefix}/lib/modprobe.d/openfwwf.conf
+
+%files help
+%doc README.openfwwf
+
+%changelog
+* Fri Oct 11 2019 openEuler Buildteam <buildteam@openeuler.org> - 5.2-21
+- Package init
+
+

openfwwf.conf

@@ -0,0 +1 @@
+options b43 nohwcrypt=1 qos=0