增加 spec 文件用于构建树莓派 hciuart 等服务的 RPM

LICENCE.pi-bluetooth

@@ -0,0 +1,32 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: pi-bluetooth
+Source: https://github.com/RPi-Distro/pi-bluetooth
+
+Files: *
+Copyright: 2016 Raspberry Pi (Trading) Ltd.
+License: BSD-3-Clause
+
+License: BSD-3-Clause
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+ 1. Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the University nor the names of its contributors
+    may be used to endorse or promote products derived from this software
+    without specific prior written permission.
+ .
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
+ A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE HOLDERS OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
+ PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
+ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
+ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

README.en.md

@@ -1,22 +1,32 @@
 # raspberrypi-bluetooth
 
 #### Description
-Load firmware of bluetooth on boot for Raspberry Pi
+The bluetooth service for RaspberryPi, which loads BCM43430A1 firmware on boot. These files are from the repositories in RaspberryPi community.
+
+- https://github.com/RPi-Distro/pi-bluetooth
 
 #### Software Architecture
-Software architecture description
+
+AArch64
 
 #### Installation
 
-1.  xxxx
+`dnf install raspberrypi-bluetooth`
-2.  xxxx
-3.  xxxx
 
 #### Instructions
 
-1.  xxxx
+After installing raspberrypi-bluetooth,
-2.  xxxx
+
-3.  xxxx
+1. Start the bluetooth service (i.e., hciuart service) to load related firmware: `systemctl start hciuart`. 
+
+2. Check the service's status using the status command: `systemctl status hciuart`.
+
+3. If this service isn’t running, you can use the restart command: `systemctl restart hciuart` to restart the service.
+
+4. To view the name and basic information of the bluetooth device, you can use the command: `hciconfig`.
+
+5. Set the service to start on boot: `systemctl enable hciuart`.
+
 
 #### Contribution
 
@@ -24,13 +34,3 @@ Software architecture description
 2.  Create Feat_xxx branch
 3.  Commit your code
 4.  Create Pull Request
-
-
-#### Gitee Feature
-
-1.  You can use Readme\_XXX.md to support different languages, such as Readme\_en.md, Readme\_zh.md
-2.  Gitee blog [blog.gitee.com](https://blog.gitee.com)
-3.  Explore open source project [https://gitee.com/explore](https://gitee.com/explore)
-4.  The most valuable open source project [GVP](https://gitee.com/gvp)
-5.  The manual of Gitee [https://gitee.com/help](https://gitee.com/help)
-6.  The most popular members  [https://gitee.com/gitee-stars/](https://gitee.com/gitee-stars/)

README.md

@@ -1,23 +1,32 @@
 # raspberrypi-bluetooth
 
 #### 介绍
-Load firmware of bluetooth on boot for Raspberry Pi
+
+Raspberry Pi 的蓝牙相关服务组件，用于树莓派开机时加载 BCM43430A1 固件。文件来自于 Raspberry Pi 社区的上游仓库：
+
+- https://github.com/RPi-Distro/pi-bluetooth
 
 #### 软件架构
-软件架构说明
 
+AArch64
 
 #### 安装教程
 
-1.  xxxx
+`dnf install raspberrypi-bluetooth`
-2.  xxxx
-3.  xxxx
 
 #### 使用说明
 
-1.  xxxx
+安装 raspberrypi-bluetooth 后，
-2.  xxxx
+
-3.  xxxx
+1. 启动蓝牙服务（hciuart 服务）用于加载相关固件：`systemctl status hciuart`。
+
+2. 查看该服务的运行状态：`systemctl status hciuart`。
+
+3. 如果该服务启动失败，重启该服务：`systemctl restart hciuart`。
+
+4. 查看蓝牙设备的名称和基本信息：`hciconfig`。
+
+5. 设置该服务开机启动：`systemctl enable hciuart`。
 
 #### 参与贡献
 
@@ -25,13 +34,3 @@ Load firmware of bluetooth on boot for Raspberry Pi
 2.  新建 Feat_xxx 分支
 3.  提交代码
 4.  新建 Pull Request
-
-
-#### 码云特技
-
-1.  使用 Readme\_XXX.md 来支持不同的语言，例如 Readme\_en.md, Readme\_zh.md
-2.  码云官方博客 [blog.gitee.com](https://blog.gitee.com)
-3.  你可以 [https://gitee.com/explore](https://gitee.com/explore) 这个地址来了解码云上的优秀开源项目
-4.  [GVP](https://gitee.com/gvp) 全称是码云最有价值开源项目，是码云综合评定出的优秀开源项目
-5.  码云官方提供的使用手册 [https://gitee.com/help](https://gitee.com/help)
-6.  码云封面人物是一档用来展示码云会员风采的栏目 [https://gitee.com/gitee-stars/](https://gitee.com/gitee-stars/)

raspberrypi-bluetooth.spec

@@ -0,0 +1,50 @@
+%global _bin_path /usr/bin
+%global _rules_path /lib/udev/rules.d
+%global _systemd_path /lib/systemd/system
+%global _license_path /usr/share/licenses/raspi
+%global debug_package %{nil}
+
+Name:		raspberrypi-bluetooth
+Version:	20200729
+Release:	1
+Summary:	bluetooth files used for RaspberryPi
+License:	BSD-3-Clause
+ExclusiveArch: aarch64
+
+Provides:	raspberrypi-bluetooth = %{version}-%{release}
+
+Source0:	%{name}-%{version}.tar.gz
+Source1:	LICENCE.pi-bluetooth
+
+%prep
+%setup -q -c
+
+%description
+This package contains executable files of bluetooth required by some RaspberryPi devices.
+
+%install
+mkdir -p %{buildroot}%{_bin_path}
+mkdir -p %{buildroot}%{_rules_path}
+mkdir -p %{buildroot}%{_systemd_path}
+mkdir -p %{buildroot}%{_license_path}
+install -p -m 644 %{_sourcedir}/LICENCE.* %{buildroot}%{_license_path}/
+cd %{name}-%{version}
+install -p -m 755 usr/bin/* %{buildroot}%{_bin_path}/
+install -p -m 644 lib/udev/rules.d/90-pi-bluetooth.rules %{buildroot}%{_rules_path}/
+install -p -m 644 debian/pi-bluetooth.bthelper\@.service %{buildroot}%{_systemd_path}/bthelper\@.service
+install -p -m 644 debian/pi-bluetooth.hciuart.service %{buildroot}%{_systemd_path}/hciuart.service
+
+cd -
+
+%files
+%dir %{_rules_path}
+%dir %{_systemd_path}
+%dir %{_license_path}
+%{_license_path}
+%{_bin_path}/*
+%{_rules_path}/*
+%{_systemd_path}/*
+
+%changelog
+* Wed Jul 29 2020 Yafen Fang<yafen@iscas.ac.cn> - 20200729-1
+- Add rules file, bthelper and hciuart from pi-bluetooth.