README.md

@@ -2,50 +2,29 @@
 
 #### 介绍
 This is a systemd unit generator that enables swap on zram.
-(With zram, there is no physical swap device. Part of the available RAM
+
-is used to store compressed pages, essentially trading CPU cycles for memory.)
+#### 软件架构
-To activate, install zram-generator-defaults subpackage.
+软件架构说明
 
 
 #### 安装教程
 
-Install zram-generator rpm package:
+1.  xxxx
-
+2.  xxxx
-yum install zram-generator
+3.  xxxx
-
-To install directly from sources, execute make build && sudo make install NOBUILD=true:
-
--zram-generator binary is installed in the systemd system generator directory (usually /usr/lib/systemd/system-generators/)
--zram-generator(8) and zram-generator.conf(5) manpages are installed into /usr/share/man/manN/, this requires ronn.
--units/systemd-zram-setup@.service is copied into the systemd system unit directory (usually /usr/lib/systemd/system/)
--zram-generator.conf.example is copied into /usr/share/doc/zram-generator/ You need though create your own config file at one of the locations listed above.
 
 #### 使用说明
 
-A default config file may be located in /usr. This generator checks the following locations:
+1.  xxxx
-
+2.  xxxx
--/run/systemd/zram-generator.conf
+3.  xxxx
--/etc/systemd/zram-generator.conf
--/usr/local/lib/systemd/zram-generator.conf
--/usr/lib/systemd/zram-generator.conf
-… and the first file found in that list wins.
-
-In addition, "drop-ins" will be loaded from .conf files in /etc/systemd/zram-generator.conf.d/, /usr/lib/systemd/zram-generator.conf.d/, etc.
-
-The main configuration file is read before any of the drop-ins and has the lowest precedence; entries in the drop-in files override entries in the main configuration file.
-
-See systemd.unit(5) for a detailed description of this logic.
-
-See zram-generator.conf.example for a list of available settings.
 
 #### 参与贡献
 
-master分支使用最新的上游版本，如果检测到上游有最新版本发布，先形成issue后再提交对应PR更新，流程如下。
+1.  Fork 本仓库
-1.  提交issue
+2.  新建 Feat_xxx 分支
-2.  Fork 本仓库
+3.  提交代码
-3.  新建 Feat_xxx 分支
+4.  新建 Pull Request
-4.  提交代码
-5.  新建 Pull Request
 
 
 #### 特技

rust-zram-generator.spec

@@ -1,103 +0,0 @@
-%global crate zram-generator
-
-Name:         rust-%{crate}
-Version:      1.1.2
-Release:      4
-Summary:      Systemd unit generator for zram swap devices
-
-License:        MIT
-URL:            https://crates.io/crates/zram-generator
-Source:         %{crate}-%{version}.crate
-Source1:        zram-generator.conf
-Source2:        zram-generator-vendor.tar.gz
-
-BuildRequires:  rust-packaging rubygem-ronn
-
-%global _description %{expand:
-This is a systemd unit generator that enables swap on zram.
-(With zram, there is no physical swap device. Part of the avaialable RAM
-is used to store compressed pages, essentially trading CPU cycles for memory.)
-}
-
-%description %{_description}
-
-%package     -n %{crate}
-Summary:     %{summary}
-Recommends:  %{_sbindir}/zramctl
-License:     MIT
-
-%description -n %{crate} %{_description}
-
-%package     -n %{crate}-defaults
-Summary:        Default configuration for %{crate}
-Requires:       %{crate} = %{version}-%{release}
-Obsoletes:      zram < 0.4-2
-BuildArch:      noarch
-
-%description -n %{crate}-defaults
-%{summary}.
-
-%prep
-%autosetup -n %{crate}-%{version} -p1
-cp -a %{S:1} .
-tar zxvf %{SOURCE2}
-%cargo_prep
-find %{_builddir} -type f -name 'Cargo.toml.orig' -exec rm -rf '{}' ';'
-
-mkdir -p .cargo
-cat >.cargo/config << EOF
-
-[source.crates-io]
-replace-with = "vendored-sources"
-
-[source.vendored-sources]
-directory = "vendor"
-EOF
-
-%build
-export SYSTEMD_UTIL_DIR=%{_systemd_util_dir}
-export LC_ALL=C.UTF-8
-%cargo_build
-%make_build SYSTEMD_SYSTEM_UNIT_DIR=%{_unitdir} SYSTEMD_SYSTEM_GENERATOR_DIR=%{_systemdgeneratordir} \
-  systemd-service man
-
-%install
-export SYSTEMD_UTIL_DIR=%{_systemd_util_dir}
-%cargo_install
-
-mkdir -p %{buildroot}%{?_systemdgeneratordir}
-cp -a $PWD/.cargo/bin %{buildroot}/usr/
-mv -v %{buildroot}%{_bindir}/zram-generator %{buildroot}%{?_systemdgeneratordir}/
-install -Dpm0644 -t %{buildroot}%{?_unitdir} units/systemd-zram-setup@.service
-install -Dpm0644 -t %{buildroot}%{_prefix}/lib/systemd %{SOURCE1}
-install -Dpm0644 -t %{buildroot}%{_mandir}/man8 man/zram-generator.8
-install -Dpm0644 -t %{buildroot}%{_mandir}/man5 man/zram-generator.conf.5
-rm -rf  %{buildroot}%{cargo_registry}/%{crate}-%{version}
-
-%files       -n %{crate}
-%license LICENSE
-%doc zram-generator.conf.example
-%doc README.md
-%{?_systemdgeneratordir}/zram-generator
-%{?_unitdir}/systemd-zram-setup@.service
-%{_mandir}/man8/zram-generator.8*
-%{_mandir}/man5/zram-generator.conf.5*
-
-%files       -n %{crate}-defaults
-%{_prefix}/lib/systemd/zram-generator.conf
-
-%changelog
-* Fri May 26 2023 duyiwei <duyiwei@kylinos.cn> - 1.1.2-4
-- Fix build error with Rust 1.67
-
-* Fri Dec 09 2022 dingdingaaaaa <dingziwei@kylinos.cn> - 1.1.2-3
-- Enable debuginfo for fix strip
-
-* Thu Sep 8 2022 duyiwei <duyiwei@kylinos.cn> - 1.1.2-2
-- remove useless subpackage zram-generator-devel
-
-* Tue Jul 19 2022 duyiwei <duyiwei@kylinos.cn> - 1.1.2-1
-- upgrade to 1.1.2
-
-* Tue May 10 2022 duyiwei <duyiwei@kylinos.cn> - 0.3.2-1
-- Package init

zram-generator.conf

@@ -1,8 +0,0 @@
-# This config file enables a /dev/zram0 device with the default settings:
-# — size — same as available RAM or 8GB, whichever is less
-# — compression — most likely lzo-rle
-#
-# To disable, uninstall zram-generator-defaults or create empty
-# /etc/systemd/zram-generator.conf file.
-[zram0]
-zram-size = min(ram, 8192)

zram-generator.yaml

@@ -1,4 +0,0 @@
-version_control: github
-src_repo: systemd/zram-generator
-tag_prefix: "v"
-separator: "."