!18 Specification NestOS Project Component Description File

From: @duyiwei7w 
Reviewed-by: @fu-shanqing 
Signed-off-by: @fu-shanqing

README.md

@@ -2,29 +2,50 @@
 
 #### 介绍
 This is a systemd unit generator that enables swap on zram.
-
+(With zram, there is no physical swap device. Part of the available RAM
-#### 软件架构
+is used to store compressed pages, essentially trading CPU cycles for memory.)
-软件架构说明
+To activate, install zram-generator-defaults subpackage.
 
 
 #### 安装教程
 
-1.  xxxx
+Install zram-generator rpm package:
-2.  xxxx
+
-3.  xxxx
+yum install zram-generator
+
+To install directly from sources, execute make build && sudo make install NOBUILD=true:
+
+-zram-generator binary is installed in the systemd system generator directory (usually /usr/lib/systemd/system-generators/)
+-zram-generator(8) and zram-generator.conf(5) manpages are installed into /usr/share/man/manN/, this requires ronn.
+-units/systemd-zram-setup@.service is copied into the systemd system unit directory (usually /usr/lib/systemd/system/)
+-zram-generator.conf.example is copied into /usr/share/doc/zram-generator/ You need though create your own config file at one of the locations listed above.
 
 #### 使用说明
 
-1.  xxxx
+A default config file may be located in /usr. This generator checks the following locations:
-2.  xxxx
+
-3.  xxxx
+-/run/systemd/zram-generator.conf
+-/etc/systemd/zram-generator.conf
+-/usr/local/lib/systemd/zram-generator.conf
+-/usr/lib/systemd/zram-generator.conf
+… and the first file found in that list wins.
+
+In addition, "drop-ins" will be loaded from .conf files in /etc/systemd/zram-generator.conf.d/, /usr/lib/systemd/zram-generator.conf.d/, etc.
+
+The main configuration file is read before any of the drop-ins and has the lowest precedence; entries in the drop-in files override entries in the main configuration file.
+
+See systemd.unit(5) for a detailed description of this logic.
+
+See zram-generator.conf.example for a list of available settings.
 
 #### 参与贡献
 
-1.  Fork 本仓库
+master分支使用最新的上游版本，如果检测到上游有最新版本发布，先形成issue后再提交对应PR更新，流程如下。
-2.  新建 Feat_xxx 分支
+1.  提交issue
-3.  提交代码
+2.  Fork 本仓库
-4.  新建 Pull Request
+3.  新建 Feat_xxx 分支
+4.  提交代码
+5.  新建 Pull Request
 
 
 #### 特技

rust-zram-generator.spec

@@ -0,0 +1,103 @@
+%global crate zram-generator
+
+Name:         rust-%{crate}
+Version:      1.1.2
+Release:      4
+Summary:      Systemd unit generator for zram swap devices
+
+License:        MIT
+URL:            https://crates.io/crates/zram-generator
+Source:         %{crate}-%{version}.crate
+Source1:        zram-generator.conf
+Source2:        zram-generator-vendor.tar.gz
+
+BuildRequires:  rust-packaging rubygem-ronn
+
+%global _description %{expand:
+This is a systemd unit generator that enables swap on zram.
+(With zram, there is no physical swap device. Part of the avaialable RAM
+is used to store compressed pages, essentially trading CPU cycles for memory.)
+}
+
+%description %{_description}
+
+%package     -n %{crate}
+Summary:     %{summary}
+Recommends:  %{_sbindir}/zramctl
+License:     MIT
+
+%description -n %{crate} %{_description}
+
+%package     -n %{crate}-defaults
+Summary:        Default configuration for %{crate}
+Requires:       %{crate} = %{version}-%{release}
+Obsoletes:      zram < 0.4-2
+BuildArch:      noarch
+
+%description -n %{crate}-defaults
+%{summary}.
+
+%prep
+%autosetup -n %{crate}-%{version} -p1
+cp -a %{S:1} .
+tar zxvf %{SOURCE2}
+%cargo_prep
+find %{_builddir} -type f -name 'Cargo.toml.orig' -exec rm -rf '{}' ';'
+
+mkdir -p .cargo
+cat >.cargo/config << EOF
+
+[source.crates-io]
+replace-with = "vendored-sources"
+
+[source.vendored-sources]
+directory = "vendor"
+EOF
+
+%build
+export SYSTEMD_UTIL_DIR=%{_systemd_util_dir}
+export LC_ALL=C.UTF-8
+%cargo_build
+%make_build SYSTEMD_SYSTEM_UNIT_DIR=%{_unitdir} SYSTEMD_SYSTEM_GENERATOR_DIR=%{_systemdgeneratordir} \
+  systemd-service man
+
+%install
+export SYSTEMD_UTIL_DIR=%{_systemd_util_dir}
+%cargo_install
+
+mkdir -p %{buildroot}%{?_systemdgeneratordir}
+cp -a $PWD/.cargo/bin %{buildroot}/usr/
+mv -v %{buildroot}%{_bindir}/zram-generator %{buildroot}%{?_systemdgeneratordir}/
+install -Dpm0644 -t %{buildroot}%{?_unitdir} units/systemd-zram-setup@.service
+install -Dpm0644 -t %{buildroot}%{_prefix}/lib/systemd %{SOURCE1}
+install -Dpm0644 -t %{buildroot}%{_mandir}/man8 man/zram-generator.8
+install -Dpm0644 -t %{buildroot}%{_mandir}/man5 man/zram-generator.conf.5
+rm -rf  %{buildroot}%{cargo_registry}/%{crate}-%{version}
+
+%files       -n %{crate}
+%license LICENSE
+%doc zram-generator.conf.example
+%doc README.md
+%{?_systemdgeneratordir}/zram-generator
+%{?_unitdir}/systemd-zram-setup@.service
+%{_mandir}/man8/zram-generator.8*
+%{_mandir}/man5/zram-generator.conf.5*
+
+%files       -n %{crate}-defaults
+%{_prefix}/lib/systemd/zram-generator.conf
+
+%changelog
+* Fri May 26 2023 duyiwei <duyiwei@kylinos.cn> - 1.1.2-4
+- Fix build error with Rust 1.67
+
+* Fri Dec 09 2022 dingdingaaaaa <dingziwei@kylinos.cn> - 1.1.2-3
+- Enable debuginfo for fix strip
+
+* Thu Sep 8 2022 duyiwei <duyiwei@kylinos.cn> - 1.1.2-2
+- remove useless subpackage zram-generator-devel
+
+* Tue Jul 19 2022 duyiwei <duyiwei@kylinos.cn> - 1.1.2-1
+- upgrade to 1.1.2
+
+* Tue May 10 2022 duyiwei <duyiwei@kylinos.cn> - 0.3.2-1
+- Package init

zram-generator.conf

@@ -0,0 +1,8 @@
+# This config file enables a /dev/zram0 device with the default settings:
+# — size — same as available RAM or 8GB, whichever is less
+# — compression — most likely lzo-rle
+#
+# To disable, uninstall zram-generator-defaults or create empty
+# /etc/systemd/zram-generator.conf file.
+[zram0]
+zram-size = min(ram, 8192)

zram-generator.yaml

@@ -0,0 +1,4 @@
+version_control: github
+src_repo: systemd/zram-generator
+tag_prefix: "v"
+separator: "."